Show:
Sort By:
41528
Intended for expanding a steering knuckle during replacement of shock-absorber or ball support and..
39,47€
39,47€
41713
Intended for dismantling external and internal bearings, pulleys and gears from the shafts and oth..
0,00€
from 4,21€ to 40,23€
41813
Intended for dismantling external and internal bearings, pulleys and gears from the shafts and oth..
0,00€
from 4,08€ to 19,28€
41712
Puller is equipped with a rotating centering thrust bolt to reduce the possibility of mechanical d..
0,00€
from 35,92€ to 220,11€
41812
Puller is equipped with a rotating centering thrust bolt to reduce the possibility of mechanical d..
0,00€
from 24,43€ to 89,92€
41723
Intended for dismantling external and internal bearings, pulleys and gears from the shafts and oth..
0,00€
from 5,24€ to 29,48€
41823
Intended for dismantling external and internal bearings, pulleys and gears from the shafts and oth..
0,00€
from 5,71€ to 18,40€
41733
Intended for dismantling external and internal bearings, pulleys and gears from the shafts and oth..
0,00€
from 11,95€ to 18,86€
41833
Intended for dismantling external and internal bearings, pulleys and gears from the shafts and oth..
0,00€
from 3,35€ to 12,37€
41811
Intended for dismantling of external bearings, pulleys and gears from shafts and other parts inter..
0,00€
from 9,97€ to 15,66€
41711
Intended for dismantling of external bearings, pulleys and gears from shafts and other parts inter..
0,00€
from 18,42€ to 28,50€
41805
Intended for dismantling external and internal bearings, pulleys and gears from the shafts and oth..
0,00€
from 16,94€ to 48,13€
41725
Intended for dismantling external and internal bearings, pulleys and gears from the shafts and oth..
0,00€
from 30,38€ to 87,63€
39738
Tap wrench is made by cold stamping method.
Equipped with a spring-loaded holding ball.
Has a ca..
13,08€
from 11,53€ to 13,08€
220084
Used for tapping of internal thread in blind and through holes with tap holder.
Material - high-s..
0,00€
from 1,23€ to 1,78€
30251
They are used for crimping wire sleeves, tubes, stamped non-insulated terminals during electrical ..
4,39€
4,39€
30253
They are used for crimping wire non-insulated terminals during electrical installation works.
Wor..
11,82€
11,82€
In Stock 417190
Designed for accurate stripping of electrical wires from various types of insulation without damag..
2,26€
2,26€
In Stock 216030
Designed for accurate stripping of electrical wires from various types of insulation without damagin..
0,00€
2,26€
40923
Used for remote testing of the temperature of car units and aggregates.
Range of measured tempera..
20,70€
20,70€
40386
Set is intended to restore the internal thread.
Restoration is carried out by screwing in spring ..
0,00€
from 9,95€ to 18,42€
In Stock 40916
Intended to complete sets of silent blocks pullers AvtoDelo 40915 and 40925.
Allows to extend set..
8,74€
from 8,74€ to 12,37€
In Stock 410611
Designed for dismantling steering rod ends of passenger cars.
The set is supplied in a plastic case..
0,00€
19,75€
41506
Used for tie rod removal with the pin diameter up to 19 mm.
Made of the chrome-vanadium tool stee..
0,00€
10,73€