Your shopping cart is empty!
Your shopping cart is empty!
Made by cold stamping method. Designed for use with an impact pneumatic tool or torque amplifier...
4,97€
Made by cold stamping method. It is used with pneumatic tool. Equipped with a spring-loaded hold..
from 2,40€ to 3,58€
Designed for using with a pneumatic impact tool. External 6-point working profile. Square drive ..
from 3,34€ to 5,09€
Mechanism with 24 teeth allows to rotate by 15 degrees minimum angle. Equipped with a flag switch..
from 18,55€ to 18,78€
Designed for using with a pneumatic impact tool or wrenches with a torque amplifier. Internal 6-p..
from 3,50€ to 24,61€
Designed for using with a pneumatic impact tool. 6-point operating profile. Made by the method o..
from 2,09€ to 2,76€
Designed for using with a pneumatic impact tool. 6-point operating profile. Made by the method o..
from 4,79€ to 6,21€
Designed for using with a pneumatic impact tool. 6-point operating profile. Made by the method o..
from 9,95€ to 10,70€
Designed for using with a pneumatic impact tool. Made by hot stamping (forging hammers). Equippe..
from 5,14€ to 7,74€
Designed for using with a pneumatic impact tool or wrenches with a torque amplifier. Internal 4-p..
from 3,03€ to 3,48€
The kit is equipped with impact socket heads. Supplied in an individual plastic case. ..
36,08€ Ex Tax: 29,82€
The kit is equipped with impact socket heads. Supplied in an individual plastic case. ..
59,96€ Ex Tax: 49,55€
Set is equipped with a steel rail with lug socket holders. Comes stored and orginized in a indivi..
25,26€ Ex Tax: 20,88€
Impact head set for metric alloy wheel nuts with optional 7/8-inch hex for Tesla and convex profile ..
50,81€
13-piece hexagonal socket set. Ranging in size from 5/64" to 9/16" with total lengths of only 38, 5..
8,45€
Tap wrench is made by cold stamping method. Equipped with a spring-loaded holding balls. Materia..
from 7,45€ to 21,56€
Tap wrench is made by cold stamping method. Equipped with a spring-loaded holding balls. Protect..
0,00€
Tap wrench is made by cold stamping method. Equipped with a spring-loaded holding ball. Material..
from 0,00€ to 3,78€
Tap wrench is made by cold stamping method. Equipped with a spring-loaded holding ball. Material..
from 0,93€ to 9,98€
6-point operating profile. Made by hot stamping (forging hammers). Material – chrome-vanadium to..
from 0,00€ to 3,80€
12-point sockets. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV..
from 2,07€ to 2,54€
12-point sockets. Made by the method of cold stamping. Material - chrome-vanadium tool steel CrV..
2,90€
Intended for dismantling and installation oxygen sensors. Sockets are made of chrome-vanadium too..
35,03€
